Infinity-Box installation manual
|
File version |
1.1 |
|
File date |
2006 Aug 01 |
|
Source |
Common installation step for all operationg systems
1. Install Infinity_Drv_v1.2.exe
2. Please read the next installation instruction according to your operation system
NOTE: "x:" means drive where Infinity-Box was installed (f.e. "C:" or "D:")
W98/ME Installation
1. Run: x:/Program Files/InfinityBox/Drivers/VC6Redist/vcredist.exe
2. Reboot PC
3. Run: x:/Program Files/InfinityBox/Drivers/Smart Card Base Components/SCBase.exe
4. Reboot PC
5. Run: x:/Program Files/InfinityBox/Drivers/Smart Card Base Components/Smclib.exe
6. Reboot PC
7. Run: x:/Program Files/InfinityBox/Drivers/e-gate_W98_Me/Setup.exe
8. Reboot PC
9. Connect box (or small card-reader dongle, if your package contain dongle and box separately) to PC USB port
Your system now have three new devices:
1. e-gate Virtual Reader Enumerators -> e-gate Virtual Reader Enumerator
2. Smart card readers -> e-gate USB Smart card reader
3. e-gate USB Smart Cards -> e-gate USB Smart Card
10. Connect box (if your package contain dongle and box separately) to PC USB port and select drivers from folder: x:/Program Files/InfinityBox/Drivers/Cable
11. Reboot PC
12. Install Infinity program modules (InstallationPackage)
13. Now you ready to work
W2K/XP Installation
1. Run: x:/Program Files/InfinityBox/Drivers/e-gate_W2k_XP/Setup.exe
2. Connect box (or small card-reader dongle, if your package contain dongle and box separately) to PC USB port
Your system now have three new devices:
1. e-gate Virtual Reader Enumerators -> e-gate Virtual Reader Enumerator
2. Smart card readers -> e-gate USB Smart card reader
3. e-gate USB Smart Cards -> e-gate USB Smart Card
3. Connect box (if your package contain dongle and box separately) to PC USB port and select drivers from folder: x:/Program Files/InfinityBox/Drivers/Cable
4. Install Infinity program modules (InstallationPackage)
5. Now you ready to work